Payment & Shipping Terms:
|Shape:||For Bulk||Application:||Masonry Fireclay Bricks|
|Performance:||High Bonding Strength||Package:||25kg Bags|
high temperature mortar,
high heat mortar mix
High bonding strength Fireclay Castable Refractory Mortar for Blast furnace
Castable Refractory Mortar used for firebrick is made of bulk refractory, which should have good masonry performance and high temperature performance, so that can bond firebrick into dense integral furnace lining.
Castable Refractory Mortar performance of masonry is refers to the refractory mortar in the masonry work to ensure the quality of masonry that has good liquidity, plastic, have certain water retention performance, can maintain uniform state not segregation precipitation, appropriate consistency and sticky for masonry, and does not dry up in order to achieve requirements of brick seam thickness within the time rubbing brick, and mortar in full.
The high temperature performance of castable refractory mortar is to ensure the performance of firebrick at high temperature.
1. Sufficient fire resistance,
2. Enough adhesive strength to combine masonry into a solid whole at the working temperature
3. Small dry shrinkage, no cracking at high temperature
4. Low apparent porosity and permeability, and good air tightness
5. Anti-slag corrosion
6. The thermal expansion coefficient is consistent with the firebrick, and different types of refractory mortars are selected for different masonry.
Refractory mortar should be chosen with consideration of the close chemical composition of firebrick to ensure that the masonry can bond reliably.
Also the mortar’s sintering temperature is or slightly lower than the parts of the working temperature so that the mortar can be sintered under operating conditions, and bond with refractory brick, but should not lower too much, so that the refractory performance can not adapt to the requirement of masonry.
Fireclay refractory mortar uses hard clay clinker as the base material and combines with soft clay or chemical binder.
Fireclay refractory mortar is suitable for masonry of fireclay bricks in upper parts of blast furnace and lower parts of hot blast stove.
|Item||Fireclay Refractory Mortar|
|Al2O3 % ≥||30||38||42||45|
|Refractoriness ℃ ≥||1620||1680||1700||1720|
|Grain size %||＜1.0mm||100|
|Setting time min||1~3|
|P.L.C 1200℃*3h %||-5~+1|
Contact Person: Astra