Payment & Shipping Terms:
|Al2O3/% ≥:||20||SiC+C/% ≥:||30|
|Bulk Density 110℃ 24h Dry Off / G/cm3 ≥:||1.65||Cold Crushing Strength /MPa:||8.0|
|Permanent Linear Change /% ≥:||-1.5~+1.5||Using Part:||Below 1000m3|
boiler refractory material,
kiln lining materials
Anhydrous Tap Hole for Hot Steel Making Large Furnace
Anhydrous tap hole mix is made of refractory aggregate, powder, binder and liquid. It is rolled and formed from the extruder. The water content is not more than 2%, after burning it formed to refractory plastic that specially used for blocking tap hole of blast furnace, supply in service state.
Anhydrous taphole clay produced by Jundao refractory fire bricks factory is used in 300 cubic-3200 cubic blast furnaces without splashing, which can reduce the labor intensity of the workers before the furnace, keep the iron flow stable, resist the erosion of iron flow, and take 40-120 minutes to tap iron. made of refractory aggregate, powder, binder and liquid. It is rolled and formed from the extruder. The water content is not more than 2%, after burning it formed to refractory plastic that specially used for blocking tap hole of blast furnace, supply in service state.
Jundao anhydrous taphole clay can effectively produce slag iron with high iron output, high coefficient, no mud, less smoke, reduce the pollution of the working environment. The tap hole depth is 1.6-3 meters, which can effectively prolong the tapping time and quantity of iron. It can effectively protect hearth, furnace wall and cooling stave, and is easy to open, save drill bit and drill pipe expenses, and keep mud for up to 6 months.
1, good sinterability,
2, good ventilation, fast drying,
3, strong resistance to high temperature melt wash,
4. After the iron is finished in the blast furnace, the iron hole can be plugged in time, and the full tapping time must be ensured.
|Bulk density 110℃ 24h dry off / g/cm3 ≥||1350℃ 3h||1.65||1.70||1.80|
|Cold crushing strength /MPa||1350℃ 3h||8.0||10.0||15.0|
|Permanent linear change /% ≥||1350℃ 3h||-1.5~+1.5||-1.5~+1.5||-1.0~+1.0|
Q1: Is Jundao (Henan) New Materials a manufacturer or trader?
A1: Manufacturer, sometimes we help our clients to purchase relevant products as a trader.
Q2: What’s the MOQ?
A2. The MOQ is 25 tons.
Q3: Can we visit your factory?
A3: Of course ,welcome at any time,seeing is believing
Q4: What’s your payment terms?
Q5: Is your company accept customization?
A5: Yes. Professional technology teams and engineers all can satisfy you.
Q6: How do you guarantee quality?
A6: For every production processing,we have complete QC system for the chemical composition and Physical properties.After production,all the goods will be tested ,and the quality certificate will be shipped along with goods.
Q7: Does your Jundao (Henan)?New Materials?supply samples?
A7: Yes, we can supply samples if necessary.
Contact Person: Astra