Product Details:
Payment & Shipping Terms:
|
| Al2O3 (%,Min）: | 65 | Fe2O3 (%,Max: | 2.2 |
|---|---|---|---|
| Refractoriness (℃,Min): | 1790 | Bond Strength (MPa, Min): | 1300℃*3h Burned 10.0 |
| Setting Time (min): | 2~3 | Grain Size Distribution (%): | <1.0mm |
| High Light: | kiln lining materials,castable refractory material |
||
Castable Refractory Mortar used for firebrick is made of bulk refractory, which should have good masonry performance and high temperature performance, so that can bond firebrick into dense integral furnace lining.
Castable Refractory mortar should be chosen with consideration of the close chemical composition of firebrick to ensure that the masonry can bond reliably. Also the mortar's sintering temperature is or slightly lower than the parts of the working temperature so that the mortar can be sintered under operating conditions, and bond with refractory brick, but should not lower too much, so that the refractory performance can not adapt to the requirement of masonry.
Special Refractory Mortars provided by us are consist of refractory powder, binder and admixture. Special Refractory Mortars are widely used as masonry for alkali resistant refractory bricks and Al-Si refractory brick.
1.High strength
2.Excellent performance
3.low drying and baking shrinkage
4.High refractory capacity
5.High bonding strength
| Special refractory motar | Al2O3 (%,Min) |
Fe2O3 (%,Max) |
refractoriness (℃,Min) |
Bond strength (MPa, Min) | Setting time (min) |
Grain size distribution (%) | ||||
| 110℃ dry off |
1100℃*3h Burned |
1300℃*3h burned | <1.0mm | >0.5mm Max |
<0.075mm Min |
|||||
| NJ-1 | 65 | 2.2 | 1790 | 6.0 | 8.0 | 10.0 | 2~3 | 100 | 5 | 50 |
| Remark | ISO Certificated; Customized | |||||||||
| Application | Masonry for alkali resistant refractory bricks and Al-Si refractory brick | |||||||||
Q1: Is Jundao (Henan) New Materials a manufacturer or trader?
A1: Manufacturer, sometimes we help our clients to purchase relevant products as a trader.
Q2: What’s the MOQ?
A2. The MOQ is 25 tons.
Q3: Can we visit your factory?
A3: Of course ,welcome at any time,seeing is believing
Q4: What’s your payment terms?
A4: Negotiation
Q5: Is your company accept customization?
A5: Yes. Professional technology teams and engineers all can satisfy you.
Q6: How do you guarantee quality?
A6: For every production processing,we have complete QC system for the chemical composition and Physical properties.After production,all the goods will be tested ,and the quality certificate will be shipped along with goods.
Q7: Does your Jundao (Henan)?New Materials?supply samples?
A7: Yes, we can supply samples if necessary.
Contact Person: Astra
